You are here:

Rode Ntg-2 Shotgun Mic With Xlr To 3.5mm Adapter

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter
Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter

The Rode NTG-2 is a condenser shotgun microphone designed for professional audio capturing in the field or indoors. With a history of manufacturing quality studio microphones, Rode has implemented low noise output electronics and wide bandwidth, both of which attribute to the NTG-2's broadcast sound quality. The super-cardioid polar pattern and line plus gradient acoustic principle effectively minimize audio and noise at the off-axis (sides) of the microphone, while the front of the capsule accurately reproduces incoming audio signal.

The result is greater intelligibility and signal-to-noise ratio when using the NTG-2 in noisy environments. The NTG-2 is powered with an internal 1.5V AA size battery or an external +48 Volt phantom power source. The output is a standard 3-pin XLR male connector. The microphone features a rugged, all metal, lightweight enclosure that is ideal for camera mounting yet durable enough to withstand the rigors of heavy road use.

The Rode NTG-2 is packaged with a microphone stand mount and windscreen. The Rode NTG-2 can be powered with an internal 1.5V AA battery or external +48V phantom power source. The NTG-2 features a lightweight metal housing that is ideal for camera mounting. Low noise output electronics provide high signal-to-noise ratio.

The Hosa Stereo Mini Angled Male to XLR Female Cable is for certain Stereo Microphones that use a single XLR as output for both Left and Right signals. It is specifically wired for use with stereo microphones wired with 3-pin male XLR outputs.

The stereo mini connection is compatible with the stereo inputs on camcorders and consumer input devices. The following pertains to our listing terms and conditions. Please read so there is no surprises as to the total cost of your item or any of our polices.

Do you sell to international buyers? We ask that you save all the original packaging.

All of our auctions are for new items unless otherwise specified by Open Box or Used. Not all Open Box items have been used, this simply indicates either the box has been opened or the packaging has been slightly damaged. The item "Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter" is in sale since Monday, June 12, 2017. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems".
The seller is "dvestore" and is located in Marysville, Washington. This item can be shipped worldwide.

  • Polar Pattern: Supercardioid
  • Dynamic Range (Typical): 121dB (per IEC651, IEC268-15)
  • Signal-to-Noise Ratio: 76dB (1kHz rel, 1Pa; per IEC651, IEC268-15)
  • Maximum Input Sound Level: 139dB SPL (@ 1% THD into 1k ohm)
  • Power Requirements: +48V phantom, 44V to 52V
  • Output Impedance: 50 ohms
  • Output Connectors: 3-pin XLR balanced
  • Dimensions: 10.94 x .

    87" (278 x 022mm) (Length x Diameter)

  • Transducer: Condenser
  • MPN: NTG2
  • Suited For: Studio Recording
  • Bundle Description: NEW Rode NTG2
    Pop Filter
    NEW Deadcat Windscreen
    XLR to 3.5mm cable
    NEW Zoom H1 handheld recorder
    Carrying Case for Zoom H1 recorder
  • Features: Auto-Lock Function
  • Connector(s): XLR 3 Pin
  • Modified Item: No
  • Microphone Form Factor: Handheld/Stand-Held
  • Brand: Rode
  • Custom Bundle: Yes
  • Type: Condenser Microphone
  • Connectivity: Wired
  • Pickup Pattern: Supercardioid

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter

Rode NTG-2 Shotgun Mic with XLR to 3.5mm Adapter